BYD
Chery
Great Wall / Haval
Geely
MG
Toyota Land Cruiser LC71/LC79 High-Spec Projector Retrofit
A source-based reference for the pictured LC71/LC79 high-spec round headlamp, covering side-specific bracket hardware, low/high-beam wiring, rear-mounted short-tail projector, OEM clips and trim restoration.
LC71/LC79 Round HeadlampShared High-Spec Bracket Application for 2024–2025 LC71 and LC79
The supplied kit contains left/right projector brackets, retaining hardware and sleeves matched to the pictured high-spec round headlamp used on LC71 and LC79.
- Model
- Toyota Land Cruiser LC71 / LC79
- Years
- 2024–2025 reference
- Headlamp
- High-spec round-headlamp unit shown
- Bracket
- Side-specific projector bracket set
- Seal
- OEM butyl-sealed housing
Confirm the left/right clips and hardware face the directions shown.
Use a short-tail projector and install it from the rear.
Reuse the original retaining clips at the marked positions.
Clip, Wiring and Rear-Clearance Details
Confirm Clip Orientation
Prepare each side-specific bracket with the clips and sleeves in the shown orientation.
Connect the Low Beam
The source marks red as low-beam positive and white as low-beam negative.
Connect the High Beam
The source marks blue as high-beam positive and gray as high-beam negative.
Confirm the LC71/LC79 High-Spec Round Headlamp
Reference Applies To
- 2024–2025 Toyota Land Cruiser LC71/LC79 shown
- High-spec round-headlamp configuration
- Side-specific projector bracket and hardware kit
- OEM butyl-sealed housing
- OEM clip positions match the source
Not Automatically Confirmed
- LC71/LC79 low-spec or other headlamp
- Other Land Cruiser model years
- Other years or regional housings
- Previously modified lamps
- Unverified projector body sizes
Send Photos for Verification
Provide the year, headlamp label, front/rear views, internal carrier, wiring and projector dimensions.
LC71/LC79 High-Spec Projector Installation Sequence
Open the Front Cover
Open the OEM butyl-sealed round headlamp while protecting the sealing channel.
Remove the OEM Projector
Remove the original projector module and retain the reusable trim and clips.
Rear-Mount the Short-Tail Projector
Install a short-tail projector from the rear to maintain housing clearance.
Install the OEM Retaining Clips
Fit the original retaining clips at the source-marked positions.
Secure the Projector and Shroud
Fasten the assembly to the OEM shroud with screws and cable ties.
Restore and Complete the Headlamp
Install the bracket into the rear housing, restore the white trim, test and reseal.
Detailed Installation Gallery
Match the LC71/LC79 Retrofit as a Complete System
LC71/LC79 Bracket Set
Confirm the side-specific left/right brackets, clips and hardware.
Short-Tail Projectors
Use compatible short-tail projectors to preserve rear clearance.
OEM Retaining Clips
Retain and reinstall the original clips in the shown positions.
Beam Wiring
Verify red/white low-beam and blue/gray high-beam circuits before operation.
Round-Headlamp Projector Installed
The completed reference shows the short-tail projector, OEM retaining clips and white trim restored inside the original round headlamp.
- Side-specific bracket secured
- Short-tail projector installed from rear
- OEM retaining clips restored
- White trim reinstalled
- Beam testing, aiming and resealing required
Toyota Land Cruiser LC71/LC79 Projector Retrofit FAQ
Which Toyota Land Cruiser models are covered?
The supplied reference covers the pictured 2024–2025 Toyota Land Cruiser LC71 and LC79 high-spec round-headlamp configuration.
Which wire colors are identified?
Red is marked low-beam positive, white low-beam negative, blue high-beam positive and gray high-beam negative. Verify the vehicle before connection.
Why is a short-tail projector required?
The source specifies a short-tail projector for rear clearance. Otherwise the rear housing must be heated and pressed down.
Which OEM parts are reused?
Retain the original mounting clips and white trim, and secure the projector assembly to the OEM shroud as shown.
How is the projector installed?
The projector is mounted from the rear, the OEM clips are fitted, and the assembly is secured with screws and cable ties before installing the bracket into the housing.
Technical reference: Based on Royalin-supplied installation photography for the pictured 2024–2025 Toyota Land Cruiser LC71/LC79 high-spec configuration. Verify the headlamp label, bracket points, projector dimensions and beam signals before ordering.
Related Headlight Retrofit Cases
Need This LC71/LC79 Projector Retrofit Solution?
Send the vehicle year, headlamp label, housing, headlamp label, rear housing, OEM clips, wiring and projector dimensions for matching.
Professional housing work, electrical testing, installation, sealing and beam aiming are recommended.