BYD
Chery
Geely
MGToyota Land Cruiser LC71/LC79 High-Spec Matrix Retrofit
A source-based reference for the pictured LC71/LC79 high-spec round headlamp, covering four-projector carrier, beam wiring, cover panels, trim orientation and daytime-running-light restoration.
LC71/LC79 Round HeadlampFour-Projector Matrix Application for 2024–2025 LC71 and LC79
The supplied kit contains main carrier, four-projector inner bracket, cover panels and hardware matched to the pictured high-spec round headlamp.
- Model
- Toyota Land Cruiser LC71 / LC79
- Years
- 2024–2025 reference
- Headlamp
- High-spec round-headlamp unit shown
- Bracket
- Four 1.5–1.7 inch matrix projectors
- Seal
- OEM butyl-sealed housing
Install the supplied sleeves and fasteners in the shown directions.
Use four compatible 1.5–1.7 inch matrix projectors.
Fit the lower trim panel with its notch facing downward.
Hardware, Bracket and Wiring Details
Confirm Hardware Orientation
Install the sleeves, nuts and clips on the main bracket in the orientation shown.
Attach the Four-Projector Carrier
Fasten the four-projector inner carrier and side cover panel to the main bracket.
Verify Low-Beam Wiring
The source marks red as low-beam positive and white as low-beam negative.
Confirm the LC71/LC79 High-Spec Round Headlamp
Reference Applies To
- 2024–2025 Toyota Land Cruiser LC71/LC79 shown
- High-spec round-headlamp configuration
- Four-projector matrix bracket and panel kit
- OEM butyl-sealed housing
- 1.5–1.7 inch projector format matches the source
Not Automatically Confirmed
- LC71/LC79 low-spec or other headlamp
- Other Land Cruiser model years
- Other years or regional housings
- Previously modified lamps
- Projectors outside the specified size range
Send Photos for Verification
Provide the year, headlamp label, front/rear views, internal carrier, wiring and projector dimensions.
LC71/LC79 High-Spec Matrix Installation Sequence
Open the Front Cover
Open the OEM butyl-sealed round headlamp while protecting the sealing channel.
Remove the OEM Projector
Remove the original central projector module from the rear housing.
Assemble Four Matrix Projectors
Install four compatible 1.5–1.7 inch matrix projectors on the inner carrier.
Install the Bracket Assembly
Place the completed four-projector bracket into the rear housing.
Install the Trim Panel
Fit the trim panel with its notch facing downward as shown.
Restore and Test the Headlamp
Reinstall the daytime running light, confirm operation and reseal the front cover.
Detailed Installation Gallery
Match the LC71/LC79 Matrix Retrofit as a Complete System
LC71/LC79 Matrix Bracket
Confirm both main brackets, inner carriers, hardware and cover panels.
Four Matrix Projectors
Use four compatible 1.5–1.7 inch projector units.
Trim Panels
Install the side cover and lower-notched trim panel in the correct orientation.
Beam Wiring
Verify red/white low-beam and blue/gray high-beam circuits before operation.
Four-Projector Matrix Assembly Installed
The completed reference shows the four matrix projectors, cover panel, lower trim panel and daytime running light restored inside the original round headlamp.
- Main matrix bracket secured
- Four 1.5–1.7 inch projectors installed
- Trim-panel notch oriented downward
- Daytime running light reinstalled
- Beam testing, aiming and resealing required
Toyota Land Cruiser LC71/LC79 Matrix Retrofit FAQ
Which Toyota Land Cruiser models are covered?
The supplied reference covers the pictured 2024–2025 Toyota Land Cruiser LC71 and LC79 high-spec round-headlamp configuration.
How many matrix projectors are used?
The kit uses four matrix projectors, with the source specifying compatible 1.5–1.7 inch units.
Which wire colors are identified?
Red is marked low-beam positive, white low-beam negative, blue high-beam positive and gray high-beam negative. Verify before connection.
How should the trim panel be oriented?
Install the trim panel with its notch facing downward as shown in the supplied reference.
Which OEM component is restored last?
Reinstall the daytime running light after the four-projector bracket and trim panel are secured and checked.
Technical reference: Based on Royalin-supplied installation photography for the pictured 2024–2025 Toyota Land Cruiser LC71/LC79 high-spec configuration. Verify the headlamp label, bracket points, projector dimensions and beam signals before ordering.
Related Headlight Retrofit Cases
Need This LC71/LC79 Matrix Retrofit Solution?
Send the vehicle year, headlamp label, housing, headlamp label, rear housing, main bracket points, wiring and matrix-projector dimensions for matching.
Professional housing work, electrical testing, installation, sealing and beam aiming are recommended.
