BYD
Chery
Geely
MGToyota Land Cruiser LC300 High-Spec Matrix Retrofit
A source-based reference for the pictured LC300 high-spec headlamp, covering rear-adjuster identification, three-projector bracket assembly, spacer placement, OEM mounting points and interference clearance.
LC300 Matrix HeadlampThree-Projector Matrix Architecture for the 2022 LC300 High-Spec Headlamp
The supplied kit contains a three-projector carrier, side brackets, spacers and fasteners matched to the pictured high-spec LC300 headlamp and rear-adjuster layout.
- Model
- Toyota Land Cruiser LC300
- Years
- 2022 reference
- Headlamp
- High-spec headlamp shown
- Bracket
- Three 1.5–1.8 inch projectors
- Seal
- OEM butyl-sealed housing
Confirm that the headlamp rear adjusters match the pictured OEM layout.
All three bracket positions accept 1.5–1.8 inch projector bodies.
Use the taller black spacer at the source-marked mounting point.
Adjuster, Hardware and Spacer Details
Identify the OEM Headlamp Layout
Confirm the rear adjuster positions match the supplied high-spec reference before disassembly.
Replace the Driver-Side Hardware
Remove the original driver-side bracket part and attach the supplied hardware in its place.
Install the Taller Spacer
Use the taller spacer at the highlighted point to align the bracket assembly.
Confirm the High-Spec LC300 Headlamp
Reference Applies To
- 2022 Toyota Land Cruiser shown
- High-spec headlamp configuration
- Three-projector bracket and hardware kit
- OEM butyl-sealed housing
- Rear adjuster layout matches the source
Not Automatically Confirmed
- Mid/low-spec LC300 headlamp
- Other LC300 model years
- Other years or regional housings
- Previously modified lamps
- Unverified projector body sizes
Send Photos for Verification
Provide the year, headlamp label, front/rear views, internal carrier, wiring and projector dimensions.
Toyota Land Cruiser LC300 Matrix Installation Sequence
Open the Front Cover
Open the OEM butyl-sealed headlamp while preserving the sealing channel.
Remove the OEM Projector Assembly
Remove the original three-projector carrier from the rear housing.
Install Three Compatible Projectors
Fit 1.5–1.8 inch projectors in all three bracket positions.
Secure the Projector Carrier
Fasten the two lower points to OEM shroud mounts and secure both upper points with cable ties.
Create Bracket Clearance
Remove only the highlighted housing section to prevent interference.
Restore and Test the Headlamp
Confirm clearance, alignment and operation before resealing the front cover.
Detailed Installation Gallery
Match the LC300 Matrix Retrofit as a Complete System
High-Spec Main Bracket
Confirm the main carrier, driver-side hardware and rear adjuster layout.
Three Compatible Projectors
Use three matched 1.5–1.8 inch projector units.
Spacer & Hardware Set
Place the taller black spacer at the highlighted point.
OEM Shroud Mounts
Retain the lower OEM points and use cable ties at both upper points.
LC300 Matrix Projector Array Installed
The completed reference shows the three-projector bracket assembly and front cover restored inside the original LC300 headlamp.
- Main matrix carrier secured
- Three compatible projectors installed
- Taller spacer installed at marked point
- OEM shroud mounting points retained
- Beam testing, aiming and resealing required
Toyota Land Cruiser LC300 Matrix Retrofit FAQ
Which LC300 headlamp is covered?
The reference covers the pictured 2022 Toyota Land Cruiser LC300 high-spec headlamp. Confirm that the rear adjuster layout matches.
How many projectors are used?
The bracket has three positions, each shown as compatible with 1.5–1.8 inch projectors.
Which spacer is required?
Use the taller spacer at the marked bracket point and install the remaining supplied hardware as shown.
How is the carrier secured?
Fasten the two lower points to the OEM shroud mounts and secure the two upper points with cable ties.
Does the housing require trimming?
Yes. Remove only the marked section to prevent bracket interference and check clearance before closure.
Technical reference: Based on Royalin-supplied installation photography for the pictured 2022 Toyota Land Cruiser LC300 high-spec configuration. Verify the headlamp label, bracket points, projector dimensions and beam signals before ordering.
Related Headlight Retrofit Cases
Need This LC300 Matrix Retrofit Solution?
Send the vehicle year, headlamp label, housing, rear adjusters, OEM carrier, mounting points and projector dimensions for matching.
Professional housing work, electrical testing, installation, sealing and beam aiming are recommended.
