BYD
Chery
Geely
MGToyota Land Cruiser Four-Projector Retrofit
A source-based reference for the pictured Land Cruiser headlamp, covering separate low/high-beam brackets, Toyota decoder connections, short-tail low-beam clearance and final projector installation.
Land Cruiser Four ProjectorsSeparate Low- and High-Beam Brackets for the 2016–2020 Land Cruiser
The supplied kit contains separate left/right low-beam and high-beam bracket sets, clips, hardware and a Toyota decoder for the pictured headlamp.
- Model
- Toyota Land Cruiser
- Years
- 2016–2020 reference
- Headlamp
- Low/high-beam projector headlamp shown
- Bracket
- Separate low/high-beam bracket sets
- Seal
- OEM butyl-sealed housing
Install the low-beam and high-beam retaining clips in the shown positions.
Trim only the marked rear area and use a short-tail bi-LED projector.
Connect light-source power, drive motor and shutter as shown.
Bracket, Decoder and OEM High-Beam Details
Install the Bracket Clips
Prepare the low-beam bracket with the supplied clip and hardware.
Connect the Toyota Decoder
Plug in the light-source power, drive-motor and shutter connectors shown in the supplied reference.
Confirm the OEM High-Beam Version
Confirm whether the original lamp uses the separate halogen high beam or the integrated LED high-beam bracket.
Confirm the Original High-Beam Configuration
Reference Applies To
- 2016–2020 Toyota Land Cruiser shown
- Projector headlamp configuration shown
- Separate low/high-beam bracket kits
- OEM butyl-sealed housing
- Verified Toyota decoder
Not Automatically Confirmed
- Other Land Cruiser headlamp designs
- Unverified OEM high-beam version
- Other years or regional housings
- Previously modified lamps
- Long-tail low-beam projector bodies
Send Photos for Verification
Provide the year, headlamp label, front/rear views, internal carrier, wiring and projector dimensions.
Toyota Land Cruiser Four-Projector Installation Sequence
Open the Butyl-Sealed Housing
Open the OEM butyl-sealed headlamp carefully; the source states that an oven is not required.
Remove the OEM Projectors
Remove the original low- and high-beam projectors and retain the reusable clips.
Prepare the Low-Beam Area
Trim the marked rear area and use a short-tail bi-LED projector for clearance.
Install Both Bracket Sets
Install the low- and high-beam brackets, fitting the high-beam retaining clip first.
Secure the Projector Nut
Position and tighten the nut at the source-marked side of the projector.
Install and Check Both Projectors
Install both projector/bracket assemblies and confirm clearance before closing the lamp.
Detailed Installation Gallery
Match the Four-Projector Retrofit as a Complete System
Low-Beam Bracket Set
Confirm both low-beam brackets, clips and supplied hardware.
High-Beam Bracket Set
Match both high-beam brackets to the verified OEM high-beam version.
Toyota Decoder
Use the specified decoder and verify power, motor and shutter connections.
Short-Tail Projectors
Confirm projector dimensions and rear clearance before assembly.
Four Projectors Installed
The completed reference shows both low- and high-beam projectors installed with the original front appearance retained; no additional shrouds are required.
- Low/high-beam bracket sets secured
- Short-tail low-beam clearance completed
- Toyota decoder connected
- High-beam retaining clips installed
- Beam testing, aiming and resealing required
Toyota Land Cruiser Four-Projector Retrofit FAQ
Which Toyota Land Cruiser headlamp is covered?
The reference covers the pictured 2016–2020 Toyota Land Cruiser headlamp and requires confirmation of the original high-beam version.
Are the low- and high-beam brackets different?
Yes. The supplied reference shows separate left/right low-beam brackets and separate left/right high-beam brackets.
Is a decoder required?
The source specifies the Toyota decoder for the low-beam retrofit and shows light-source power, drive-motor and shutter connections.
Which projector is required for the low-beam position?
Use a short-tail bi-LED projector because the rear housing area has limited clearance.
Are there different OEM high-beam versions?
Yes. The source shows a halogen high-beam version with separate low/high beams and an LED high-beam version with an integrated bracket. Confirm the headlamp before ordering.
Technical reference: Based on Royalin-supplied installation photography for the pictured 2016–2020 Toyota Land Cruiser headlamp configuration. Verify the headlamp label, bracket points, projector dimensions and beam signals before ordering.
Related Headlight Retrofit Cases
Need This Toyota Land Cruiser Four-Projector Solution?
Send the vehicle year, headlamp label, housing, original low/high-beam modules, connectors and clearance photos for matching.
Professional housing work, electrical testing, installation, sealing and beam aiming are recommended.
