BYD
Chery
Great Wall / Haval
Geely
MG
Toyota Hilux Projector Retrofit
A structured retrofit reference for the pictured Hilux headlight, covering bracket orientation, OEM projector removal, rear projector mounting and shroud restoration.
Hilux HeadlightHilux Projector Bracket Application
The supplied reference identifies a dedicated bracket and vehicle-specific bracket arrangement for the pictured 2021–2025 Hilux headlight.
- Model
- Toyota Hilux
- Years
- 2021–2025 reference range
- Edition
- Projector Headlight
- Headlight
- OEM headlight assembly shown
- Shroud
- OEM shroud retained
Retain the OEM decorative shroud and secure it with self-tapping screws in the shown positions.
Install a compatible projector from the rear of the bracket and verify optical alignment.
Verify the projector compatibility and verify beam operation on the vehicle before final sealing.
Identify Wiring and Prepare the Projector Assembly
Bracket Orientation
Confirm bracket orientation, projector position and vehicle-side high/low-beam wiring before modification.
Control Module
Use compatible bi-beam projector wiring and verify polarity and operation before connecting it to the vehicle.
Headlight and Bracket
Confirm the projector headlight, projector body, bracket orientation and available rear clearance before installation.
Confirm the Hilux Configuration
Reference Applies To
- 2021–2025 Toyota Hilux shown
- 2021–2025 Hilux headlight with vehicle-specific projector bracket
- Application-specific metal bracket
- OEM decorative shroud retained
- 3-inch square projector format shown
Not Automatically Confirmed
- Other years or headlight configurations
- Other years, regions or internal carriers
- Previously modified housings
- Unverified projector dimensions
- Unverified sealant condition or prior repairs
Send Photos for Verification
Provide model year, headlight label, front/rear views, original projector, carrier, connector and trim photos.
Bracket Orientation, Bracket Hardware and Trim Mounting
Confirm vehicle-specific projector bracket, assemble the retaining clips and hardware, and secure the decorative shroud without contacting the lens cover.
Bracket Orientation
Identify the low-beam positive feed and the projector mounting and beam circuits before connecting the module.
Retaining Clip Detail
Remove the indicated factory components, then install the supplied retaining clip, locator and fasteners in the shown positions.
Decorative Shroud Mounting
Secure the decorative shroud with self-tapping screws at the shown points, keeping its inner edge against the lens cover without pressure.
Hilux Installation Sequence
Confirm the Wiring
Identify the low-beam positive feed and the projector mounting and beam circuits before connecting the module.
Open the Headlight
Heat and open the OEM hot-melt-sealed housing carefully while protecting the lens channel and internal trim.
Remove the OEM Projector
Remove the original projector assembly and retain the reusable factory trim and mounting components.
Prepare the Bracket
Install the supplied retaining clips, locators and hardware on the vehicle-specific bracket.
Install the Projector
Mount the bracket, then install the compatible projector from the rear and confirm alignment.
Restore and Test
Secure the decorative shroud, test low/high beam operation, verify alignment and reseal the headlight.
Detailed Installation Gallery
Match the Hilux Projector Retrofit as a Complete Kit
Hilux Bracket Set
Use the vehicle-specific left and right metal brackets and supplied guide posts.
Compatible Projector
Confirm projector body, mounting pattern, output and rear clearance.
Compatible Wiring
Match the module to the pictured Hilux headlight and projector wiring.
Fasteners & OEM Parts
Retain the OEM shroud and ring, and use the supplied clips, studs and screws.
Projector Installed, OEM Appearance Restored
The completed reference shows the new projector installed inside the original projector headlight with the exterior assembly restored.
- Application-specific bracket and guide posts installed
- OEM shroud restored in its original position
- Projector operation and alignment verified
- OEM decorative shroud secured with self-tapping screws and restored
- Headlight resealed and beam aiming required
2021–2025 Toyota Hilux Retrofit FAQ
Which Hilux headlight is covered?
The pictured 2021–2025 Toyota Hilux headlight.
Does the headlight need to be resealed?
Yes. Verify the projector wiring and test both beams before closing the housing.
Must the OEM shroud be reused?
Yes. Retain and reinstall the original shroud.
How is the decorative shroud secured?
Use self-tapping screws at the shown points without placing excessive pressure on the lens cover.
Which projector format is shown?
The reference shows a compatible projector installed from the rear of the bracket.
Technical reference: Based on Royalin-supplied fitment documentation and installation photography for the configuration shown. Verify year, edition, headlight label, connector and carrier before ordering.
Related Headlight Retrofit Cases
Need This Hilux Retrofit Solution?
Send the model year, edition, headlight label, front/rear views, projector, connector and internal carrier photos for verification.
Professional electrical testing, installation, sealing and beam aiming are recommended.