BYD
Chery
Geely
MGToyota Highlander RX350 Projector Retrofit
A source-based reference for the pictured Highlander halogen headlamp, covering rear-housing access, RX350 projector preparation, bent-adapter fitment, clearance grinding and waterproof restoration.
Highlander Halogen HeadlampRear-Access RX350 Adapter Application for the 2018 Highlander
The supplied kit contains an RX350 bent adapter and mounting hardware designed for the pictured Highlander halogen headlamp.
- Model
- Toyota Highlander
- Years
- 2018 reference
- Headlamp
- Halogen headlamp shown
- Bracket
- RX350 bent adapter
- Seal
- Front lens cover remains installed
Cut only the marked rear-housing area; the front lens cover remains installed.
The bent section compensates for the RX350 projector thickness difference.
Plastic-weld and waterproof-seal the removed rear-housing section.
Housing Cut, Projector and Clearance Details
Confirm Rear Access Method
Follow the supplied outline and protect the nearby adjuster and wiring.
Prepare the RX350 Projector
Retain the upper tab and relocate the front adapter plate to the rear.
Create Reflector Clearance
Grind only the marked area to prevent interference with the OEM reflector bowl.
Confirm the Highlander Halogen Headlamp
Reference Applies To
- 2024–2026 Toyota Highlander shown
- Halogen projector headlamp configuration
- RX350 bent adapter and rear-access workflow
- Front lens cover remains installed
- OEM projector position and housing clearance verified
Not Automatically Confirmed
- Other Highlander headlamp versions
- Highlander models outside the pictured 2018 version
- Other years or regional housings
- Previously modified lamps
- Unverified RX350 projector or housing history
Send Photos for Verification
Provide the year, headlamp label, front/rear views, internal carrier, wiring and projector dimensions.
Highlander RX350 Rear-Access Installation Sequence
Cut the Rear Access Area
Heat the housing and cut the marked rear section carefully with a utility knife.
Remove the OEM Projector
Loosen the original screws and remove the projector directly through the rear access opening.
Prepare the RX350 Projector
Retain only the upper tab and move the front adapter plate to the rear of the projector.
Create Motor-Cover Clearance
Cut a notch first, snap off the section and grind carefully to prevent bracket interference.
Secure and Align the Projector
Use the original mounting points, secure the lower point with a self-tapping screw and adjust alignment.
Plastic-Weld and Waterproof the Housing
Reinstall the cut rear section, plastic-weld it and apply a waterproof seal after testing.
Detailed Installation Gallery
Match the RX350 Retrofit as a Complete System
RX350 Bent Adapter
Confirm the bent adapter, mounting loops and application-specific orientation.
Prepared RX350 Projector
Retain the upper tab and reposition the front adapter plate to the rear.
Compact Shroud
Use a compact projector shroud when the selected projector requires it.
Housing Repair Materials
Prepare plastic-welding and waterproof sealing materials for rear-housing restoration.
RX350 Projector Installed and Housing Restored
The completed reference shows the RX350 projector aligned behind the original lens with the rear-housing access section welded and sealed.
- Bent adapter fitted to RX350 projector
- OEM mounting points retained
- Motor cover and reflector cleared
- Rear housing welded and waterproofed
- Beam testing, aiming and resealing required
Toyota Highlander RX350 Projector Retrofit FAQ
Which Toyota Highlander headlamp is covered?
The reference covers the pictured 2018 Toyota Highlander halogen headlamp using an RX350 bent projector adapter.
Does this retrofit require opening the front lens cover?
The supplied workflow accesses the projector through a cut rear-housing section and does not show removal of the front lens cover.
Why is the adapter bracket bent?
The bent section compensates for the projector thickness difference after the RX350 front adapter plate is moved to the rear.
Which areas require clearance work?
The source shows controlled grinding on the motor cover and OEM reflector bowl, plus outward notches aligned to the original projector screw holes.
How is the rear housing restored?
Reinstall the removed housing section, plastic-weld it and seal it waterproof after alignment and testing.
Technical reference: Based on Royalin-supplied installation photography for the pictured 2024–2026 Toyota Highlander Halogen projector headlamp configuration. Verify the headlamp label, bracket points, projector dimensions and beam signals before ordering.
Related Headlight Retrofit Cases
Need This Highlander RX350 Retrofit Solution?
Send the vehicle year, headlamp label, housing, headlamp label, headlamp label, rear housing, OEM projector mounts and RX350 projector photos for matching.
Professional housing work, electrical testing, installation, sealing and beam aiming are recommended.
