BYD
Chery
Great Wall / Haval
Geely
MG
Toyota Highlander Four-Projector Bracket Retrofit
A source-based reference for the pictured Highlander four-projector conversion, covering the factory cold-seal housing, Toyota decoder wiring, inner and outer projector mounting, trim restoration and final testing.
2018–2021 Highlander Four-Projector KitFour-Projector Bracket Application for the 2018–2021 Highlander
The supplied reference identifies a complete four-projector bracket set and Toyota LED decoder for the pictured factory cold-seal Highlander headlamp.
- Model
- Toyota Highlander
- Years
- 2018–2021 reference
- Headlamp
- Four-projector headlamp conversion shown
- Bracket
- Inner and outer four-projector bracket set
- Decoder
- Toyota LED headlamp decoder shown
Open and reseal the OEM cold-seal housing with controlled heat and clean surfaces.
Rear-mount the outer projector and front-mount the inner projector.
Verify low-beam polarity and the high-beam positive trigger before operation.
Four-Projector Mounting, Decoder and Wiring Details
Verify Beam Wiring
Identify low-beam positive/negative and the high-beam positive connection.
Use the Correct Mounting Direction
Rear-mount the outer projector and front-mount the inner projector.
Confirm Inner Shroud Clearance
An A-style shroud may be used on the inner projector when clearance permits.
Confirm the Highlander Four-Projector Configuration
Reference Applies To
- 2018–2021 Toyota Highlander shown
- Four-projector bracket configuration shown
- Complete inner and outer bracket set
- OEM cold-seal housing
- Toyota LED decoder and wiring match the source
Not Automatically Confirmed
- Other Highlander headlamp internal layouts
- Highlander models outside 2018–2021
- Other regional headlamp housings
- Previously modified trim or mounting points
- Unverified projector dimensions, polarity or decoder wiring
Send Photos for Verification
Provide the vehicle year, headlamp label, front/rear views, reflector bowl and projector dimensions.
Highlander Four-Projector Installation Sequence
Identify the Beam Wiring
Verify low-beam positive, low-beam negative and the high-beam positive connection point shown in the source.
Prepare the Toyota LED Decoder
Confirm the decoder connectors and wire functions before connecting the replacement projectors.
Open the Cold-Seal Headlamp
Open the factory cold-seal housing while protecting the lens and sealing channel.
Remove the Original Trim Bezel
Remove the OEM trim bezel to expose the inner and outer projector mounting areas.
Mount the Inner and Outer Projectors
Rear-mount the outer projector; front-mount the inner projector and secure its trim plate behind it.
Reinstall the Trim and Test
Reinstall the trim bezel, test both projector pairs and verify aim, clearance and sealing before final assembly.
Detailed Installation Gallery
Match the Four-Projector System as a Complete Kit
Four-Projector Bracket Set
Confirm the complete left/right inner and outer bracket set for the pictured headlamp.
Four Compatible Projectors
Match projector diameter, mounting direction and rear clearance to each bracket position.
Toyota LED Decoder
Verify the decoder, low-beam polarity and high-beam positive trigger before connection.
Trim and Mounting Hardware
Confirm the inner trim plates, fasteners and optional A-style shrouds as a complete system.
Four-Projector Bracket System Installed
The completed reference shows the inner and outer projector pairs installed behind the restored OEM trim bezel.
- Factory cold-seal housing opened
- Original trim bezel removed and restored
- Outer projectors rear-mounted
- Inner projectors front-mounted
- Toyota LED decoder wiring verified
- Clearance, beam aim and sealing require final verification
Toyota Highlander Four-Projector Retrofit FAQ
Which Toyota Highlander headlamp is covered?
This reference covers the pictured 2018–2021 Toyota Highlander headlamp configured for the four-projector bracket kit.
Is a decoder included in the reference?
Yes. The supplied reference shows a Toyota LED headlamp decoder; verify its connector and wire functions before installation.
How are the two projectors mounted?
The outer projector is rear-mounted. The inner projector is front-mounted, with its trim plate secured behind the projector.
Can a shroud be used on the inner projector?
The source shows that an A-style shroud can be used for the inner projector when clearance is confirmed.
Which wiring points must be verified?
Confirm low-beam positive, low-beam negative and the high-beam positive connection shown. Test polarity and function before resealing.
Technical reference: Based on Royalin-supplied installation photography and article 960 for the pictured 2018–2021 Toyota Highlander four-projector bracket kit. Verify the headlamp, mounting points, projector dimensions, polarity and decoder wiring before ordering.
Related Headlight Retrofit Cases
Need This Highlander Four-Projector Solution?
Send the vehicle year, headlamp photos, inner/outer mounting points, projector dimensions and decoder wiring for matching.
Professional headlamp opening, trimming, installation, sealing and beam aiming are recommended.