BYD
Chery
Great Wall / Haval
Geely
MG
Toyota Highlander High-Spec LED Projector Retrofit
A source-based reference for the pictured Highlander high-spec LED headlamp, covering reflector removal, controlled cutting, front-mounted projector fitment, spacer placement and final shroud clearance.
Highlander High-Spec LED HeadlampHigh-Spec LED Bracket Application for the 2015–2017 Highlander
The supplied reference identifies a dedicated left/right bracket set for the pictured cold-seal Highlander LED headlamp.
- Model
- Toyota Highlander
- Years
- 2015–2017 reference
- Headlamp
- High-spec LED unit shown
- Bracket
- Vehicle-specific front-mount set
- Seal
- OEM cold-seal headlamp
Trim only the reflector-bowl areas marked in the supplied installation images.
Fit the projector tightly against the bracket front before installing the assembly.
Confirm that the projector, bracket and shroud do not interfere.
Reflector Cutting, Spacer and Bracket Details
Follow the Marked Cut Line
Remove only the reflector material outlined in yellow.
Install the Spacer and Screw
Place the supplied spacer and screw at the identified mounting position.
Remove Local Interference
Grind only the contact area required for stable projector and bracket clearance.
Confirm the Highlander High-Spec LED Headlamp
Reference Applies To
- 2015–2017 Toyota Highlander shown
- High-spec LED headlamp configuration
- Application-specific left/right bracket set
- OEM cold-seal housing
- Projector and shroud dimensions match the source
Not Automatically Confirmed
- Low-spec or halogen Highlander headlamps
- Highlander models outside 2015–2017
- Other regional headlamp housings
- Previously modified reflector bowls
- Unverified projector body dimensions
Send Photos for Verification
Provide the vehicle year, headlamp label, front/rear views, reflector bowl and projector dimensions.
Highlander High-Spec LED Installation Sequence
Remove the OEM Reflector Assembly
Remove the original integrated reflector and projector assembly from the opened headlamp.
Cut the Marked Reflector Area
Cut the reflector bowl only along the yellow marked area shown in the supplied reference.
Front-Mount the Projector
Fit the projector tightly against the front face of the vehicle-specific bracket.
Install the Spacer and Screw
Place the supplied spacer at the identified mounting point and secure it with the matching screw.
Secure the Bracket to the Reflector
Install the assembled projector bracket on the prepared reflector bowl at the three shown mounting points.
Install the Shroud and Check Clearance
Fit the projector shroud, grind any interfering area and confirm free clearance before final assembly.
Detailed Installation Gallery
Match the LED Retrofit as a Complete System
Vehicle-Specific Bracket Set
Confirm the left/right 2015–2017 Highlander high-spec LED brackets.
Compatible LED Projector
Confirm the projector body, front-mount pattern and shroud clearance.
Spacer and Fasteners
Use the supplied spacer and screws in the positions shown by the source.
OEM Reflector and Shroud
Retain the prepared reflector bowl and projector shroud after controlled trimming.
Projector Bracket and Shroud Installed
The completed reference shows the projector and shroud installed in the prepared OEM reflector assembly.
- Integrated OEM reflector assembly removed
- Marked reflector area trimmed
- Projector front-mounted to bracket
- Spacer and bracket fasteners secured
- Clearance, beam aim and sealing require final verification
Toyota Highlander High-Spec LED Retrofit FAQ
Which Toyota Highlander headlamp is covered?
This reference covers the pictured 2015–2017 Toyota Highlander high-spec LED headlamp with the original integrated reflector and projector assembly.
What must be removed from the original lamp?
The supplied sequence removes the OEM integrated reflector assembly before the marked reflector-bowl section is cut.
How is the replacement projector mounted?
The projector is front-mounted to the application-specific bracket, then the bracket is secured to the prepared reflector bowl using the shown spacer and screws.
Is trimming required?
Yes. Cut only the yellow-marked reflector-bowl area and grind any point that interferes with the projector or bracket.
Can the original projector shroud be retained?
The supplied sequence shows the projector shroud installed after bracket fitment, provided final clearance is confirmed.
Technical reference: Based on Royalin-supplied installation photography for the pictured 2015–2017 Toyota Highlander high-spec LED headlamp. Verify the headlamp label, bracket points, projector dimensions and clearance before ordering.
Related Headlight Retrofit Cases
Need This Highlander LED Retrofit Solution?
Send the vehicle year, headlamp label, reflector bowl, mounting points and projector dimensions for matching.
Professional headlamp opening, trimming, installation, sealing and beam aiming are recommended.