01 Hero · RX350-type adaptive carrier

RX350-Type Adaptive

RX350-Type Adaptive Projector Bracket Retrofit

One-Piece Bent Carrier · Original Adaptive Mechanism

INSTALLATION REFERENCE

RX350-type adaptive projector carrier retrofit: one-piece bent bracket, original lower mechanism transfer, front-flush mounting, reused shaft bushing, motor and retaining spring clip.

◇ CT5 Facelift ◇ Configuration-Specific Carrier

View Installation Guide

Completed RX350-type adaptive carrier and projectorRX350-Type Mechanism Reference
02 Vehicle application

RX350-Type Adaptive Application

Models
Adaptive vehicles with the documented OEM RX350-type projector
Years
Match original mechanism; no single year range specified
Headlamp
Original RX350-type adaptive projector assembly shown
Layout
Replacement projector fitted to a bent carrier within the original RX350-type adaptive support
Factory Parts
Reuse the lower adaptive mechanism, shaft bushing, motor and retaining spring clip
One-Piece Bent Carrier · Original Adaptive Mechanism kit
Match the Original Mechanism

The supplier describes adaptive vehicles using an original RX350-type projector, not a universal fit for all RX350 vehicles.

Front-Flush Projector Mounting

The illustrated replacement projector sits against the front of the bent carrier.

Transfer Original Adaptive Parts

Reuse the lower mechanism, shaft bushing, motor and spring clip.

03 Configuration details

Identify and Preserve the Original Adaptive Parts

Inspect the One-Piece Bent Carrier

Step 01

Inspect the One-Piece Bent Carrier

Compare the formed support and shaft locations with the original adaptive assembly.

Match the RX350-Type Original Assembly

Step 02

Match the RX350-Type Original Assembly

Confirm the original projector and adaptive support match the documented configuration.

Keep the Original Shaft Bushing

Step 03

Keep the Original Shaft Bushing

Remove the OEM projector and retain the circled bushing for installation on the new bracket.

04 Compatibility notice

Confirm the Lamp, Carrier and Module Selection

Documented Configuration

  • Original RX350-type projector in an adaptive support
  • Matching carrier geometry and mounting points
  • Transferred original lower adaptive mechanism and motor
  • Original bushing and shaft-retaining spring clip reused

Do Not Assume

  • All RX350 vehicles or years are confirmed
  • The source gives a single universal vehicle year range
  • Original bushings and clips can be discarded
  • A mechanical fitment statement supplies vehicle-specific wiring

Request Matching

Send lamp labels, module dimensions and the intended configuration.

Request Verification

05 Installation process

Installation Sequence

Remove the Original Projector

Step 01

Remove the Original Projector

Separate the projector from the original support while preserving the shaft bushing.

Remove the Lower Adaptive Mechanism

Step 02

Remove the Lower Adaptive Mechanism

Release the mechanism from the underside of the original projector.

Fit the Mechanism to the Metal Carrier

Step 03

Fit the Mechanism to the Metal Carrier

Install the original lower mechanism at the illustrated position on the replacement bracket.

Front-Flush Mount the Projector

Step 04

Front-Flush Mount the Projector

Secure the replacement projector against the front of the carrier.

Inspect the Rear Assembly

Step 05

Inspect the Rear Assembly

Check fasteners, body clearance and the transferred mechanism from behind.

Check the Lower Mechanism

Step 06

Check the Lower Mechanism

Confirm that the lower mechanism seats in the illustrated orientation.

Reinstall the Bushing and Motor

Step 07

Reinstall the Bushing and Motor

Install the saved bushing on the new carrier shaft and reinstall the lower adaptive motor in the original support.

Restore the Shaft-Retaining Spring Clip

Step 08

Restore the Shaft-Retaining Spring Clip

Reinstall the upper spring clip, confirm secure shaft retention and check smooth adaptive travel before final aiming.

06 Electrical reference

Original Mechanism and Electrical Information Limits

RX350-type lower adaptive mechanism detail
Mechanical reference: original lower adaptive mechanism transferred to the replacement carrier. A wiring pinout is not supplied.

Supplier Instruction

This source documents mechanical transfer of the original adaptive mechanism, bushing, motor and shaft-retaining clip. It does not specify a universal electrical pinout, decoder, harness or OEM light-source-retention requirement. Confirm the electrical arrangement for the actual vehicle and selected projector.

Test low/high switching, warning behavior and clearance during adjustment movement before final sealing.

07 Components to confirm

Match the Complete Kit

One-Piece Bent Carrier

Match shaft and lower-mechanism geometry to the original support.

Replacement Projector

Mount flush against the front of the bracket.

Original Lower Mechanism and Motor

Transfer and reinstall in the documented orientation.

Shaft Bushing and Spring Clip

Reuse the saved bushing and restore the retaining clip.

08 Installation result

Completed Adaptive Projector Assembly

RX350-Type Adaptive Projector Bracket Retrofit completed

Confirm beam aim, electrical behavior, adjustment travel and cover clearance before final sealing.

09 Installation photographs

Detailed Installation References

10 Frequently asked questions

RX350-Type Adaptive FAQ

Does this fit every Lexus RX350?

No such universal claim is made. The supplier describes adaptive vehicles originally using an RX350-type projector; match the actual original mechanism and carrier geometry.

What year range does the source specify?

It does not specify a single vehicle year range. This is a mechanism-based fitment reference.

Which original parts are transferred?

The lower adaptive mechanism, original shaft bushing, lower motor and shaft-retaining spring clip.

Which side of the carrier receives the projector?

The illustrated projector mounts flush against the front of the metal carrier.

Why keep the original bushing?

It is reinstalled on the new carrier shaft when the assembly is restored to the original adaptive support.

Does the article specify decoding or wiring?

No. Confirm electrical requirements for the actual vehicle and selected projector rather than inferring them from mechanical fitment.

Technical reference: Supplier article 33 and supplied installation photographs.

Related Headlight Retrofit Cases

Match Your RX350-Type Adaptive Carrier

Send your lamp label and intended projector configuration.

Request This SolutionContact Royalin

REQUEST A BUSINESS SOLUTION

For retrofit shops, distributors and automotive lighting businesses.

We supply automotive lighting retrofit solutions and components exclusively for business customers worldwide.

1. Your Business
2. Your Vehicle
3. Contact Information
4. Your Message (Optional)

We will reply within 1 business day.