01 Hero · multi-model high-spec quad case

2013–2018

BMW 4 Series F32 / F33 / F36 High-Spec Quad-Projector Retrofit

Adaptive Outer Low Beam + Inner High Beam Brackets
INSTALLATION REFERENCE

A source-based reference for the shared high-spec headlamp architecture used by the pictured F32 coupe, F33 convertible and F36 Gran Coupe, covering both outer adaptive and inner high-beam projector positions.

◇ BMW 4 Series F32 Coupe◇ F33 Convertible◇ F36 Gran Coupe◇ High-Spec Quad Projectors

View Installation Guide

2013 to 2018 BMW 4 Series high-spec headlampF32 / F33 / F36 High-Spec Headlamp
02 Multi-model application

One High-Spec Bracket System for Three 4 Series Body Styles

The supplied reference identifies the same outer adaptive and inner high-beam bracket architecture for the pictured F32, F33 and F36 applications. Confirm the exact headlamp version and internal carrier before ordering.

Coupe
BMW 4 Series F32
Convertible
BMW 4 Series F33
Gran Coupe
BMW 4 Series F36
Years
2013–2018 reference range
Housing
Factory Valeo cold-sealed unit shown
Layout
Outer adaptive low beam + inner high beam
BMW 4 Series outer adaptive low-beam bracket pair
Outer Low-Beam Position

Uses the adaptive carrier with one projector guide post preinstalled.

Inner High-Beam Position

Uses a separate bracket with front-facing protruding clip nuts.

DRL Restoration

Remove and reinstall the daytime-running-light assembly after clearance work.

03 Technical reference

Clip Direction, Projector Preparation and Adaptive Linkage

BMW 4 Series inner high-beam bracket clip direction

Do Not Reverse the Inner Clips

Keep the protruding nut at the front exactly as shown before installing the inner high-beam bracket.

BMW 4 Series adaptive low-beam projector guide post

Preinstall the Outer Guide Post

Install one guide post on each outer adaptive low-beam projector before bracket assembly.

BMW 4 Series inner high-beam projector preinstalled nut

Set the Inner Projector Nut Depth

Preinstall one nut on the inner high-beam projector with approximately 3 mm engagement.

04 Compatibility notice

Confirm the High-Spec Valeo Headlamp before Ordering

Model Applications Shown

  • 2013–2018 BMW 4 Series F32 coupe
  • 2013–2018 BMW 4 Series F33 convertible
  • 2013–2018 BMW 4 Series F36 Gran Coupe
  • Matching high-spec Valeo headlamp architecture
  • Adaptive linkage and DRL configuration shown

Not Automatically Confirmed

  • Low-spec or non-adaptive headlamps
  • Other BMW generations or regional lamp versions
  • Different housing manufacturers
  • Projectors with unverified body dimensions
  • Missing or damaged adaptive linkage components

Send Photos for Verification

Provide the model code, year, headlamp label, front signature, adaptive linkage, DRL assembly and original projector carrier.

Request Application Verification

05 Installation process

F32 / F33 / F36 High-Spec Quad Installation Sequence

Open the Valeo Cold-Sealed Headlamp

Step 01

Open the Valeo Cold-Sealed Headlamp

Open the factory Valeo cold-sealed front cover using controlled professional procedures.

Remove the Daytime Running Light

Step 02

Remove the Daytime Running Light

Remove the DRL assembly carefully and retain its wiring and mounting hardware.

Remove the Factory Projectors

Step 03

Remove the Factory Projectors

Remove both original projector assemblies while protecting the adaptive linkage and housing.

Trim the Upper Factory Carrier

Step 04

Trim the Upper Factory Carrier

Locally trim only the upper bracket area that interferes with the replacement projector.

Install the Inner Bracket and Linkage

Step 05

Install the Inner Bracket and Linkage

Rear-mount the inner high-beam bracket and reconnect the adaptive linkage arm.

Restore the Daytime Running Light

Step 06

Restore the Daytime Running Light

Install the outer adaptive bracket, restore the DRL and verify projector, trim and linkage clearance.

Detailed Installation Gallery

06 Components to confirm

Match the Outer and Inner Brackets as One Adaptive System

Outer Adaptive Low-Beam Brackets

Confirm the dedicated left/right outer carriers and preinstall one guide post on each projector.

Inner High-Beam Bracket Pair

Match the separate inner brackets and keep the protruding clip nuts facing forward.

Adaptive Linkage and Fasteners

Retain the linkage arms, guide posts, 3 mm preinstalled nuts and all version-specific mounting hardware.

DRL and Factory Trim Components

Protect the daytime-running-light assembly and prepare the original trim for controlled local clearance work.

Completed BMW 4 Series high-spec quad-projector retrofit
07 Installation result

Four Projector Positions with Restored DRL and Trim

The completed reference restores the original exterior appearance around the new outer and inner projector positions.

  • F32, F33 or F36 application verified
  • Outer adaptive and inner high-beam brackets installed
  • Adaptive linkage reconnected and tested
  • Daytime-running-light assembly restored
  • Beam aim, clearance, movement and sealing tested
08 Frequently asked questions

BMW F32 / F33 / F36 High-Spec Quad Retrofit FAQ

Which BMW 4 Series models are covered?

The supplied reference covers the pictured 2013–2018 BMW 4 Series F32 coupe, F33 convertible and F36 Gran Coupe high-spec headlamp architecture. Verify the lamp label before ordering.

What brackets are included in the quad-projector system?

The system uses adaptive brackets for the outer low-beam projectors and separate brackets for the inner high-beam positions.

How should the inner high-beam clips be installed?

Do not install them backwards. Keep the protruding nut at the front in the photographed orientation.

What is preinstalled on the projectors?

Preinstall one guide post on each outer adaptive low-beam projector. For each inner high-beam projector, preinstall one nut with approximately 3 mm engagement.

Is the adaptive linkage retained?

Yes. Install the inner bracket to the rear housing and connect the adaptive linkage arm as shown, then verify free movement.

What trimming is required?

Locally trim only the upper factory carrier area, projector accessory interference point and recessed shroud area identified in the supplied images.

Technical reference: Based on Royalin-supplied installation photography and article 859 for the pictured 2013–2018 BMW 4 Series F32/F33/F36 high-spec quad-projector bracket. Verify the model, lamp manufacturer, adaptive linkage, projector dimensions, DRL and trim clearance before ordering.

Related Headlight Retrofit Cases

09 Business inquiry

Need This BMW 4 Series High-Spec Quad Bracket?

Send the model code, year, headlamp label, adaptive linkage, DRL and projector photos for matching.

Professional cold-seal opening, linkage verification, controlled trimming, beam aiming and resealing are recommended.

REQUEST A BUSINESS SOLUTION

For retrofit shops, distributors and automotive lighting businesses.

We supply automotive lighting retrofit solutions and components exclusively for business customers worldwide.

1. Your Business
2. Your Vehicle
3. Contact Information
4. Your Message (Optional)

We will reply within 1 business day.