BMW 7 Series G11 / G12 LCI Base-Trim Quad-Projector Retrofit
A reference for the pictured LCI base-trim headlamp, covering separate low- and high-beam carriers, handed motor transfer, connecting-rod installation and the required decoding or factory-source-retention solution.
BMW G11/G12 LCI HeadlampSeparate Low-Beam and High-Beam Carriers
Article 486 demonstrates a complete four-projector conversion and permits low-beam-only or high-beam-only upgrades. The illustrated low-beam carrier retains the original motor; do not assume earlier G11/G12 brackets or wiring apply.
- Models
- BMW 7 Series G11 / G12 LCI
- Years
- 2019–2022 reference range
- Headlamp
- Base-trim ZKW unit shown
- Layout
- Low beam + high beam
- Electrical
- Decoding or source retention; wide-voltage harness

Mark each original motor and return it to the correct side.
Use its dedicated retaining clips, fasteners and connecting-rod arrangement.
Select decoding or retained sources and power the added projectors through the specified wide-voltage harness.
Clip Orientation, Motor Identity and Connecting Rod
Follow the Clip Orientation
Install the low-beam clips exactly as illustrated before seating the carrier.
Keep Left and Right Identified
The original motors differ by side. Mark them before removal and transfer the factory clip.
Restore the Connecting Rod
Fit the rod after seating the carriers and verify smooth travel without binding.
Match the Actual LCI Base-Trim Lamp
Reference Applies To
- Pictured 2019–2022 G11/G12 LCI base-trim configuration
- Matching ZKW lamp and carrier mounting points
- Original motor and connecting-rod architecture shown
- Verified decoding or source-retention solution
Not Automatically Confirmed
- Earlier non-LCI or Icon bracket systems
- Other trim or different-market headlamps
- Different motors, carrier points or connectors
- Unverified wiring pins or projector dimensions
Send Photos for Verification
Provide year, lamp label, front signature, motor, carrier and connector photos.
LCI Base-Trim Quad-Projector Installation Sequence
Open the ZKW Cold-Sealed Lamp
Separate the front cover professionally and protect the reusable DRL and decorative parts.
Remove the DRL and Projectors
Release the original DRL and projector assemblies, retaining the parts required for the selected electrical solution.
Assemble the Brackets
Fit the retaining clips and assemble the low-beam carrier in the illustrated orientation.
Transfer the Correct Motor
Mark left/right motors before removal; install the correct motor and factory clip on each low-beam bracket.
Install Carriers and Connecting Rod
Secure the low- and high-beam carriers in the housing, then install the connecting rod as shown.
Mount the Projectors and Test
Mount the selected projectors directly, restore the DRL and verify wiring, decoding/source retention, clearance and aim.
Selected Installation Details
Match the Carriers, Motors, Linkage and Harness
Low-Beam Bracket Pair
Match the main carriers, retaining clips, original clips and handed motors.
High-Beam Bracket Pair
Confirm the inner brackets, retaining clips and matching fasteners.
Original Motors and Connecting Rod
Preserve motor identity and install the connecting rod with free movement.
Electrical Solution and Harness
Confirm decoding or retained factory sources, plus a wide-voltage harness for the added projectors.

Four Projectors with Restored LCI Lighting Trim
The supplied result restores the original DRL and decorative structure around the upgraded positions.
- Correct LCI lamp configuration verified
- Left/right motors refitted correctly
- Connecting rod and brackets securely installed
- Decoding or retained-source solution tested
- Projector clearance, adjustment and beam aim checked
BMW G11/G12 LCI Base-Trim Retrofit FAQ
Which BMW headlamp is covered?
Article 486 covers the pictured 2019–2022 BMW 7 Series G11/G12 LCI base-trim lamp. Confirm the ZKW label, internal carrier, motor and mounting points before ordering.
Can only one position be upgraded?
Yes. The supplied reference permits low-beam-only or high-beam-only conversion in addition to the complete four-projector layout.
Is decoding required?
The source requires decoding or retention of the original light sources. The added projectors use a wide-voltage harness. Confirm the selected electrical solution on the actual vehicle.
Can the left and right motors be interchanged?
No. The installation image states that the motors differ by side. Mark them before removal and refit the correct motor to each carrier.
How is the low-beam bracket prepared?
Install the retaining clips in the shown orientation, assemble the carrier and transfer the original clip and motor to their illustrated mounting points.
What must be checked before closing the lamp?
Confirm bracket stability, connecting-rod seating, free adjustment movement, wiring clearance and restored DRL fitment. Test beam functions and the selected decoding/source-retention solution before sealing and aiming.
Technical reference: Based on supplied installation photography and article 486. Verify the lamp, handed motors, projector dimensions and electrical solution before ordering.
Related Headlight Retrofit Cases
Match Your BMW G11/G12 LCI Brackets
Send the lamp label, internal carrier and selected low-only, high-only or complete quad-projector scope.













